Chief Minister Kirankumar Reddy Biography

Kiran Kumar Reddy was born on September 13, 1960 in Hyderabad to N Amarnath Reddy and Sarojamma.
He hails from a political family. His father N. Amarnath Reddy was a former Congress politician. Amarnath Reddy is often considered the political guru of former Chief Minister Nara Chandrababu Naidu. Amarnath Reddy also served as a minister in PV Narasimha Rao’s cabinet.

born 13 September 1960 is an Indian politician who has been the 16th Chief Minister of Andhra Pradesh since 2010. A four-time MLA in Andhra Pradesh, he belongs to the Indian National Congress. He was sworn in as the Chief Minister of Andhra Pradesh after Konijeti Rosaiah submitted his resignation to Governor ESL Narasimhan on 24 November 2010.

Early life

KKR was born in Hyderabad to Sarojamma and N. Amarnath Reddy, a former Congress party member and a minister in P. V. Narasimha Rao cabinet as he was considered close to late Indira Gandhi and P.V. Narsimha Rao. His family hails from Nagaripalle, near Kalikiri , Chittoor district.

He did his schooling from Hyderabad Public School and intermediate from St. Josephs’ Junior College, Hyderabad. He did his B.Com from Nizam College and LL.B from University College of Law, Osmania University. He was the captain of the Hyderabad under-22, South Zone Universities and Osmania University cricket team.

Political career

Kiran Kumar Reddy was elected to Andhra Pradesh Legislative Assembly in 1989 after his father’s death.[8] He served as member of the Public Undertakings Committee and Assurance Committee. He was elected to the state assembly from Native Vayalpadu (Valmikipuram) in 1989, 1999 and 2004. He lost in 1994 when Congress was routed in Chittoor district. He won from Pileru in 2009 after Valmikipuram got merged into Pileru constituency under delimitation. A known YSR loyalist, he was the Congress government chief whip for five years from 2004, before he was made the speaker.

Kiran Kumar Reddy was unanimously elected as Speaker of the 13th Andhra Pradesh Assembly in June 2009. His name for the speaker’s post was proposed by erstwhile chief minister YS Rajasekhara Reddy,Praja Rajyam Party chief Chiranjeevi, AIMIM floor leader Akbaruddin Owaisi, Agriculture minister N. Raghuveera Reddy and two other independents.
As Chief Minister

Kiran Kumar Reddy was chosen to be the new Chief Minister of Andhra Pradesh after incumbent K Rosaiah resigned citing personal reasons, by the Congress Legislature Party and authorised party 2 010

Education
Kiran Kumar Reddy did his schooling in Hyderabad Public School in Hyderabad. He studied Intermediate in St. Josephs’ Junior College and later did his Bachelors in Commerce from Nizam College. He did LL.B from University College of Law at the Osmania University.

Kiran Kumar has a keen interest in sports. He was a former first class player and played cricket for the Hyderabad team in Ranji matches. He was the captain of the South Zone under-22 team, Hyderabad under-25 team and the Osmania University cricket team.
Family
Kiran Kumar Reddy is married to Radhika Reddy. They have a son Nikhilesh Reddy and a daughter Niharika Reddy.
Professional Biography
Kiran Kumar Reddy is a four time MLA.
After the death of his father in 1989, Kiran Kumar Reddy was elected to the Assembly from Vayalpad (Valmikipuram) constituency. He lost in the 1994 elections, but won in the subsequent 1999, 2004 and 2009 elections. Kiran Kumar became the Congress Chief Whip in 2004 and later became the Speaker of the Andhra Pradesh Legislative Assembly in 2009. Despite being a four time MLA, Kiran Kumar never served as a minister.
16th Chief Minister of Andhra Pradesh
Kiran Kumar Reddy was chosen to be the 16th Chief Minister of Andhra Pradesh when Rosaiah resigned on November 24, 2010. In a CLP meeting on the same day, the Congress Legislature Party authorized party chief Sonia Gandhi to choose Rosaiah’s successor, who named Kiran Kumar Reddy. Kiran Kumar took oath as Chief Minister on November 25, 2010.
Successfully defeats the no-confidence motion
In December 2011, the Kiran Kumar Reddy faced a no-trust motion. Opposition party leader N Chandrababu Naidu moved the motion which was accepted after a couple of days of uproar in the Winter session of the assembly on December 3, 2011.

The no-trust motion was moved on the claim that the Kiran Kumar Reddy’s Government hasn’t come to the aid of farmers who are facing a lot of problems due to drought situation. A debate on the motion was held for two days and the voting finally took place on December 5, 2011. Despite a lot of support from opposition parties to the no-trust motion, the Government was able to successfully defeat it with the help of its allies Praja Rajyam Party and the MIM. The no-confidence motion was defeated 160-122.
2012
December 11, 2012: Five Telangana Congress MPs submitted a privilege notice to Lok Sabha Speaker Meira Kumar seeking action against Kiran Kumar Reddy for refusing to meet the seven Lok Sabha MPs on the day of Telangana March on September 30, 2012.

The privilege notice was submitted by Manda Jagannatham, Madhu Yaskhi Goud, Ponnam Prabhakar, S Rajaiah and G Vivek on behalf of the seven MPs.
2011
February 9, 2011: Chief Minister Kiran Kumar Reddy to participate in Rachabanda in Khammam and Medak districts.
February 6, 2011: Kiran Kumar Reddy welcomes the Praja Rajyam Party merger with Congress.
February 5, 2011: Kiran Kumar meets with leaders of Telangana Joint Action Committee.
February 3, 2011: Chief Minister Kiran Kumar participates in Rachabanda in West Godavari and Krishna districts.
February 2, 2011: Kaka’s comments on AICC President Sonia Gandhi unfortunate, says Kiran Kumar.
2010
December 25, 2010: Chief Minister Kiran Kumar Reddy says Government is committed to help farmers in the state.
December 24, 2010: Kiran Kumar Reddy welcomes President Pratibha Patil in Hyderabad. Leaves to Tirupati in the evening on a two day trip.
December 23, 2010: All party meeting convened by Kiran Kumar on the farmers’ problems fail.
December 21, 2010: Kiran Kumar reaches Hyderabad in the night after attending the Congress Plenary meeting in New Delhi.
December 17, 2010: Meets Rajya Sabha MP Brinda Karat in Hyderabad. Promises welfare programs to the physically disabled in the state.
December 16, 2010: Kiran Kumar meets the members of the Sri Krishna Committee who are on their final official trip to the city before submitted their report to the central government.
December 14, 2010: Kiran Kumar inaugurates India Open Grand Prix international tournament in Hyderabad.
December 13, 2010: Kiran Kumar Reddy promises that peace will prevail in the state after December 31, 2010. He speaks at the Assembly and says that the responsibility to maintain law and order in the state lies with the Government.
December 12, 2010: Kiran Kumar meets Tadipatri MLA JC Diwakar Reddy for the first time after the MLA lost a place in the cabinet in the last minute.
December 11, 2010: CM meets with ministers from Telangana regions. He promises that the Government will lift away the cases against students from Telangana regions who took part in the Telangana movement.
December 9, 2010: Kiran Kumar does an aerial survey on the damage caused to the farmers crops in Guntur. Promises to send a team to Delhi to request the Central Government to assess the damage.
December 8, 2010: Kiran Kumar Reddy meets CPM State Secretary Raghavulu and senior CPM leader Madhu. He receives a letter from them on the important problems in the state.
December 7, 2010: Kiran Kumar enquires about the incessant rains in the state via teleconference from New Delhi. Appoints officials to monitor the situation in the state.
December 6, 2010: Kiran Kumar garlands the statue of B R Ambedkar at Basheerbagh, Hyderabad. Leaves to Delhi in the evening to discuss about post of Deputy CM, Speaker etc. with Sonia Gandhi.
December 5, 2010: CM goes on his first official trip to Rangareddy. Addresses a huge gathering at Tandoor. Inaugurates two electricity substations and development programs.
December 4, 2010: Kiran meets with founders of ‘Jagan Yuvasena’. Asks party workers to be loyal.
December 3, 2010: Kiran Kumar Reddy speaks on the occasion of International Day of Persons with Disabilities at the Harihara Kala Bhavan in Hyderabad. Assures Government’s support to the disabled.
December 2, 2010: Kiran Kumar successfully pacifies the ‘unhappy’ ministers. He holds his first cabinet meeting in the evening.
December 1, 2010: Kiran Kumar Reddy sends the list of his cabinet ministers to Governor ESL Narasimhan. He enters his new office at the Secretariat at 9:52 in the am. KKR’s Cabinet Ministers take oath at Raj Bhavan. Vatti Vasanth Kumar resigns within 12 hours of inducting into KKR’s cabinet. Several other ministers expresses displeasure over their portfolios.
November 2010
November 30, 2010: Kiran Kumar Reddy meets former Assembly Speaker Suresh Reddy, Daggubati, Aanam and Raghuveera Reddy following Jagan’s resignation from the Congress Party.
November 29, 2010: Kiran Kumar Reddy meets Governor ESL Naramsimhan. He holds discussions with party MLAs who are within his reach.
November 28, 2010: Kiran Kumar Reddy meets Congress President Sonia Gandhi. He announces to the media that his new Cabinet will be sworn on on December 1, 2010.

November 27, 2010: Kiran Kumar Reddy meets Congress leaders in New Delhi. He says that the Deputy Chief Minister will be from Telangana region.

November 26, 2010: Kiran Kumar meets Governor ESL Narasimhan and former Chief Minister K Rosaiah. He later met IAS, IPS and IFS officials at the Lake View Guest House.
November 25, 2010: Kiran Kumar Reddy takes oath as the 16th Chief Minister of Andhra Pradesh. The oath was administered by Governor ESL Narasimhan. Kiran Kumar Reddy takes the oath in Telugu wearing a simple attire. Right after taking the oath, KKR visited the NIMS hospital. He later addressed the media to gave a brief idea on his governance will be.
November 24, 2010: Chief Minister K Rosaiah resigns citing personal reasons. Hours later, CLP Meeting was held and the decision to choose the new Chief Minister was unanimously given to Party President Sonia Gandhi. Finance Minister Pranab Mukherjee later announces that Kiran Kumar Reddy will be the new chief minister.

Upcoming Solar Power Technology How To Effec On Home

If you don’t know much about solar technology , it’s helpful to learn the basics. This technology is very practical. Solar is a very efficient power system, and the uses for solar are endless. Wherever you need power, solar can provide it.
Solar cells- How they work:-

Converting solar energy into usable electricity is a simple process which has been around for several decades. The silicon based cells, which make up a solar panel, convert sunlight into electricity through a process known as the ‘photovoltaic effect’.

The ‘photovoltaic effect’ is a process in which ‘photons’  from the sun are absorbed and transferred to an external source (like your light globes) by your solar panels.
The amount of power your solar panels produce will vary depending on the number, configuration and orientation of the cells and the temperature and intensity of the sunlight they are exposed to.

Solar panels- How they connect and what they can do:-
Solar Cells are arranged into panels that are sized for a particular power output.

When photons collide with the cells, they excite electrons on the surface that shake loose and start a flow of electrons, or direct current (DC electricity) to an external source.

In most cases solar panels are usually mounted on the roof of houses, sheds or garages, but they can also be installed directly onto the ground.  Solar panels should be installed in the area that is exposed to the most sunlight.

A most ideal location for a solar panel is a north-facing roof inclined at 30 – 35 degrees.  Having said that an orientation within 45 degrees east or west of that will only have marginal differences in the amount of power a solar panel produces.

Education Futer Devalopments

department of civil engineering

Samantha’s Got No Fans in ‘T’-State?

Being a girl from Tamil circuit, this cute smiling damsel got no fans from the Sambar Land according to buzz. The recent trade reports of her latest flick are adding fuel to these conclusions.
Samantha’s latest flick ‘Yeto Vellipoyindi Manasu’ got rave reviews and more than heroes Nani (in Telugu) or Jiiva (in Tamil), only our spicy beauty got that critical acclaim for brilliant performance.

According to trade buzz, the Telugu version of the flick collected around 1 crore in the overseas circuit, while the Tamil version made only 53 lakhs. That means, Telugu version is doing two hundred percent better than Tamil version. Analysts felt that Samantha magic is working only on Telugu people but not on other circuits. In that case, we have to accept the fact that Sam had no fans in Tamil state.

It is really a surprise that the Tamil version ‘Nethane Yen Ponvasantham’ is doing very average despite the presence of top star like Jiiva and director Gautham Menon. We have to see how the final collections will be.

Ways of Successful Technology Implementation

Many ways of success implementation:-

Leadership must provide active and committed support — financial, logistical, and moral.
1 ) A technology program is only going to succeed when school boards, school superintendents, and school principals commit to it in word and deed. That support would take the form of practical allocations in terms of all necessary release time and training for teachers and administrators.

The best leadership must work to supply and maintain an “appropriate environment” that will function as fertile ground for educationally sound outcomes. The teacher is a member of the leadership team too, and should be equally committed to technology-integrated education.

2) Selling is better than telling. Everyone needs to buy into the change that technology brings.
The best leadership establishes an environment in which expected outcomes occur spontaneously. Technology should never be forced on teachers; its use should never come as a mandate from on high.

Teachers must be given the opportunity to prepare for the kind of change that computer-based technology brings. The best leadership therefore enables teachers to become the best that they can be through consultation, collaboration, communication, support, respect, and encouragement.

3) Invest in, and train, a core team of teacher-computerizes.
Teacher-computerizes are men and women who are committed to using computer-based educational technology, and who have been given the opportunity to gain a sufficiently high level of expertise to qualify them to act as role models, advisers, and trouble shooters in matters having to do with computer-based educational technology.

In every school, there should be one or more teacher-computerizes, the number depending on the size of the school and, of course, on the school’s commitment to educational computing.

Innovation Technologies for New Build Homes

A number of new technologies are being employed in newly built homes. These include improved robotic vacuum cleaners that integrate with the home layout, home appliances that interface with mobile computers, wet rooms, under floor heating, heated driveways, and ethanol fireplaces.

One recent innovation in home cleaning is the laser robot vacuum. Earlier robotic vacuum cleaners simply wandered around the house bumping into things, but laser robot vacuum cleaners can scan the house and make an internal map of it.

Heating and cooling systems such as geothermal ground source heating are great solutions for under floor heating. Geothermal heat pumps use the ground as a heat sink in the summer, and borrow heat from it in winter. The cooling system can use refrigerant, natural groundwater, or a combination of the two.

Wet rooms are a structural redefinition of the modern bathroom. The wasted space typical of in a separate shower stall and bathroom setup is eliminated; essentially, the entire room is a shower. This increases shower space while making the bathroom easier to keep clean. The floor is built at an appropriate gradient so that all water seeps into the drain.

Nayak audio launch first look – Ram Charan – Kajal Agrawal – VV Vinayak

VV Vinayak directed on Nayak movie audio relese date, starring Ram Charan, is going to release for Sankranti, according to its producer Danayya.

He said that the film had reached its last leg of shoot. The audio release is planned in a big way in the presence of fans in Hyderabad on December 16. “The film is going to be a very special film not only to me and to Vinayak, but the lakhs of fans of mega star family,” he said.

“The audience will see a new Ram Charan in Nayak. He will make the audience remind the timeless legacy of megastar in some sequences.For the first time in his carer Ram Charan will be seen in dual role and SS Thaman has composed the music. VV Vinayak is the director and DVV Danayya is producing Nayak under Universal Media banner. Kajal and Amala Paul are big assets to the film as they have come out with their best onscreen romantic moments,” he said.

Referring to the story of Nayak, VV Vinayak said: “There are a number of people who dominate public for no good reason, but with money, power and muscle. They are not leaders. A true leader would just emerge from the masses. This is the story.”

Next Generation presented to Latest Laptop D-Roll Technology

Roll laptop information

d-roll Laptop: As 4G mobile for the next generation technology mobiles phones, same it is we will have the latest laptop D-Roll technology is a next generation concept, it is the more distinctive from the existing ones, it has both profile and task in the D-Roll technology laptop .

A tube shape laptop it can be used for large data sketches storage tubes inspired from the storage mostly used by the artists, designers etc..

It eliminates perception laptops looking for the traditional authentications. D-Roll has multitasking operational mode. This laptop is unfolded completely while it operating in full function mode with peripherals turned on. This also turned on main body attached with display turn off a smaller screen and allows the users to find and send mails when this is functioning email mode. All video and picture can we add on with the help of VC and also it locks the system can provide security to the D-Roll laptop.

Features are as under
Flexible OLED Screen
VC Video Camera
Power Button
Fingerprint Lock
LED Screen
Vent
Speaker Holes
Foot

D-roll has malty design technology has foldable and flexible screen and QWERTY .the tube is able to store and rolled up, video camera can be connect in the right end of the tube much more capable with the latest technology.

New Solar Energy Technology

Scientists at an American university have unveiled a revolutionary new technology that uses nanoparticles to convert solar energy directly into steam that could be used for sanitation and water purification in developing countries.

The new “solar steam” method is so effective it can even produce steam from icy cold water, said inventors from the Laboratory for Nanophotonics (LANP) at Rice University in Houston, Texas.

The new technology has an overall energy efficiency of 24%. Photovoltaic solar panels, by comparison, typically only have an overall energy efficiency around 15%, said the university.

The inventors said they expect the first uses of the new technology will not be for electricity generation but rather for sanitation and water purification in developing countries.

“This is about a lot more than electricity,” said LANP director Naomi Halas, the lead scientist on the project.

“With this technology, we are beginning to think about solar thermal power in a completely different way,” said Halas.

The efficiency of solar steam is due to the light-capturing nanoparticles that convert sunlight into heat. When submerged in water and exposed to sunlight, the particles heat up so quickly they instantly vaporize water and create steam.

Halas said the solar steam’s overall energy efficiency can probably be increased as the technology is refined.

“We’re going from heating water on the macro scale to heating it at the nanoscale,” Halas said.

“Our particles are very small – even smaller than a wavelength of light – which means they have an extremely small surface area to dissipate heat. This intense heating allows us to generate steam locally, right at the surface of the particle, and the idea of generating steam locally is really counterintuitive.”

Rice graduate student Oara Neumann videotaped a solar steam demonstration in which a test tube of water containing light-activated nanoparticles was submerged into a bath of ice water. Using lens to concentrate sunlight onto the near-freezing mixture in the tube, Neumann showed she could create steam from nearly frozen water.

Steam is one of the world’s most-used industrial fluids. About 90 percent of electricity is produced from steam, and steam is also used to sterilize medical waste and surgical instruments, to prepare food and to purify water.

Most industrial steam is produced in large boilers, and Halas said solar steam’s efficiency could allow steam to become economical on a much smaller scale.

Another potential use could be in powering hybrid air-conditioning and heating systems that run off of sunlight during the day and electricity at night.